Door Handle Replacement
Door handles may seem like a small detail however, if you don't like the way they look or find them difficult to use and use, you should consider replacing them. Installing the new handle on your door is simple if you have patience.
Most modern door handles have cover plates that conceal the screws to give them a beautiful appearance. If the new handle doesn't already have them connected, you'll need to attach them separately.
Removing the old Handle
The door handle isn't only a decoration for your home it also serves as an element of security that allows you to lock and unlock your door. Over time the door handle can start to lose its grip or feel loose. It could also begin to look worn out and old. This is an indication that it's the time to replace your door handle.
One of the first signs that your door handle is in need of replacing is the fact that it is becoming difficult to operate. This is an issue because it means you can not lock or unlock your door which could be a security risk for you and your family.
Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle can be extremely dangerous, particularly when your children or elderly family members are unable to open it and end up trapped in the. It's simple to replace a damaged handle on the door.
Modern door handles are generally standard sizes and should be able to fit any door. If you're not sure whether the new door handle you're buying will fit, try taking out the old one and determining the holes in its housing. This will help you purchase the right size door handle.
The easiest way to remove the door handle you have been using is to unscrew it from the door itself. This is usually done with the screw driver. upvc door handles repairmywindowsanddoors have the cover plate, which conceals the screws used to mount them. You will need to remove it to get to the screws. After removing the handle that was previously used, take note of the way the spindle is attached. This will assist you in aligning the new handle.
You can also remove your door handle by unscrewing it from the latch mechanism. You can use a screwdriver to remove the door handle. However, you will need to locate the small latch, which is located on the edge of the trim piece. Once you've removed the latch, you'll need to remove the handle from the strike plate and then remove the latch from the door edge.
Take off the Strike Plate
When you replace the handle, you'll be required to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The new handles will have two latch plates which are a circular and a rectangular plate (see the above diagram that shows the parts of the door handle). If your current latch plate is rectangular, swap it to a circular one so that the latch hooks into the strike plate in a manner that makes the handle more comfortable to use.
The first step is to remove the screw that is holding the old latch plate in place. The screws are usually quite tight and require a lot of force to loosen them. It is helpful to have a second person help with this part if possible.
After the screws have been removed and the latch plate should slide out of the door with ease. If it's stuck or won't move using a nail file to scratch around the edges of the latch plate. This can sometimes open the plate.
Now you can prepare the new strike plate for installation. Install the latch plate in the door jamb using the screws that were included with the new handles. Don't over tighten your screws as this can cause damage to the strike plate.
If you're unsure whether the latch plate is in the correct position Try closing and then opening the door to determine whether it latches and closes correctly. If it doesn't then you'll have to adjust the strike plate upwards or down, or move it forward or back until the door shuts and latches correctly.
If the door is still moving or jiggles, you might have to expand your latch hole on the strike plate. This is more prevalent with older doors, but could be due to wear and tear hinge mortises that are too narrow or not the right size for the latch, or because of damage or a broken strike plate. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.
Remove the Latch
The latch is an angled metal piece that slides in and out of a hole on the inside of your door. The latch is pushed forward when you turn the handle. It also hooks into an opening in the door frame so that the door is closed. If your door is wobbling when you close it, replacing the latch could be the only thing needed to fix the problem.
The screws that hold the door latch are difficult to see, but you can usually insert a screwdriver into a small hole in the trim plate and then pry the latch off. After taking off the trim plate you should be able to remove the latch, as well as the bolts that hold it in place and the spindle that holds it.
If the latch isn't easily removed, use a paperclip or tool to take it off the handle mechanism. Insert the item into the recessed latch slot, and gently twist it or jiggle until you feel the that the latch and handle are beginning to break off. You may need to repeat this process several times before you can take the latch off.
After the old latch has been removed, you should be able to insert the new latch into the slot with no difficulties. Make sure the latch is properly positioned in the slot and aligned with the screw chambers and then use your new screws to secure it to the strike plate and door frame.
Measure the existing backset (the distance between the center of the large hole in the door's front and the edge) prior to installing the new handle. You should also check that the size of the latch on the new handle is in line with the measurement of your existing handle.
If you're replacing the handle or latch or handle, or if your previous lock cylinder has been damaged, then you'll require an entirely new one. If you're not switching locks the new lock will fit into your existing recess and work with your existing keys. Be sure to select the latch with a rectangular cover plate that match your handles.
Removing the Cover Plate
You can replace your old door handles with a contemporary design of roses and levers to make a difference in the appearance of your home. You can buy complete sets of escutcheons, escutcheons, privacy adaptors and escutcheons.
To replace the door handle inside remove the cover plate (or rose) that protects the screws and the inner mechanism. Use a flathead to remove the plate. It could have an opening on one edge or be held by a pin.
Once the cover plate is removed take off the screw that holds the inside handle in place, and then set it aside. Take off the screws that hold both the outer and inner plates. You can loosen them with a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Place them aside.
Not all doors have this gap. If it doesn't, you'll need to make a hole in the door to install the new handle. The procedure for this is the same as opening a door using locks, but you'll have to be extra careful to avoid damaging the door or frame.
Installing new screws for the door knob is necessary after holes have been made. Purchase the same dimensions as your old screws to prevent getting a handle that is too loose or tight. You'll also need to install a new latch plate and strike rod that aren't included in most door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent choice if you're in the market of a top-quality interior door handle replacement set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's a great choice for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.